DCH Construction delivers carbon-negative Passivhaus Plus home using MMC

By Published On: July 16th, 2026Categories: News, Rebuild, Top Stories

DCH Construction has completed one of the UK’s rare Passivhaus Plus-certified homes, delivering a carbon-negative residential project in Essex using modern methods of construction (MMC), prefabricated straw panels and bio-based materials.

The 98m² home, known as Hayrick and designed by Stanley Bragg Architects, stores almost 40 tonnes of carbon within its building fabric while generating more energy than it consumes through an integrated photovoltaic (PV) array and battery storage system.

Located on a working farm in North Essex alongside a Grade II listed barn and farmhouse, the project was designed for a farming family and combines contemporary construction techniques with a rural setting.

MMC and straw panels deliver carbon-negative building fabric

The project uses a prefabricated EcoCocon straw panel system for the external walls, with a cradle-to-gate embodied carbon assessment showing emissions of 381kg CO₂e/m² offset by 391kg CO₂e/m² of biogenic carbon storage.

READ MORE: FMB marks 10 years of Trading Standards partnership to strengthen construction standards

According to the project team, this means the building begins its life as carbon negative while exceeding the embodied carbon targets set under the RIBA 2030 Climate Challenge.

Manufactured off site, the wall panels were delivered ready for installation, reducing programme time, transport movements and on-site waste while improving construction quality and airtightness.

The wall system achieves Passivhaus-level thermal performance without additional insulation layers and is combined with a timber frame and Warmcel cellulose roof insulation. The fully bio-based building envelope is designed to remain breathable while being recyclable at the end of its life.

Passivhaus performance supported by rigorous detailing

To achieve Passivhaus Plus certification, the project recorded an airtightness result of 0.41 air changes per hour at 50 Pascals (ACH@50Pa), comfortably exceeding the Passivhaus requirement of 0.6 ACH.

Construction details include triple-glazed windows with integrated blinds to reduce overheating, sheep’s wool insulation around window frames to minimise thermal bridging, continuous insulation and airtight membranes, and sealed service penetrations throughout the building envelope.

READ MORE: Construction firms urged to make heatwave planning part of everyday site management

The project team said achieving high levels of airtightness relied on disciplined sequencing and clearly defined responsibilities for each trade rather than specialist construction techniques.

Despite construction taking place during winter, moisture management measures enabled the bio-based prefabricated system to be installed safely throughout the programme.

Renewable technologies support energy-positive operation

Hayrick has achieved Passivhaus Plus certification through a combination of low energy demand and on-site renewable generation.

An 8.1kWp roof-mounted photovoltaic array paired with a 10.4kWh battery generated 3.2MWh of electricity between July and December 2025, while only 250kWh was imported from the grid during the same period.

The home also incorporates an air source heat pump, mechanical ventilation with heat recovery (MVHR) and smart energy monitoring systems to optimise operational performance.

READ MORE: Lighthouse Charity delivers £6.3m in construction workforce support 

Modelled space heating demand is 14kWh/m² per year, with an Energy Use Intensity (EUI) of 27.6kWh/m² annually.

The insulated Isoquick raft foundation system also contributed to the building’s thermal performance by reducing thermal bridging while minimising excavation and concrete use compared with traditional strip foundations.

Project logistics were adapted to suit the working farm location, with prefabricated panels arriving in coordinated deliveries that reduced vehicle movements, heavy plant requirements and construction waste.

The project has since been recognised with the Constructing Excellence Essex Club Residential Project of the Year award and has been showcased through industry site visits and knowledge-sharing events to promote wider adoption of low-carbon construction techniques.

The project team said Hayrick demonstrates that carbon-negative homes can be delivered today using commercially available products, standard construction skills and repeatable building systems, providing a practical model for contractors looking to reduce embodied carbon while improving building performance.

Share

SUBSCRIBE
To receive the latest industry news direct to your inbox!